Network Certification

e-milles creations has the most modern tools and technologies for network certification, while relying on a well-trained and equipped staff with many years of experience in installations of all sizes and complexity. With each integrated part of the network infrastructure, before receipt and practical use, a detailed certification of the data and voice cable infrastructure is carried out, in accordance with international standards and specifications.

 

Certification Process

1. On-Site Inspection and Study:

  • On-Site Presence:
    Our specialized technicians visit the installation sites to perform a detailed inspection, surveying and evaluating the network structure.

  • Routing Mapping:
    We record the wiring routes through clear and precise sketches, which act as a guide for the implementation and future maintenance of the installation.

 

2. Specification of Standards and Material:

The certification of the cable infrastructure is carried out according to the following standards:

  • ANSI/TIA/EIA-568-B (Β.1, Β.2, Β.3 or later)

  • ANSI/TIA/EIA-569-A

  • ANSI/TIA/EIA-570-A

  • TIA/EIA-606

  • EIA/TIA 604 FOCIS 2-12

  • EIA/TIA 604 FOCIS 6

  • EIA/TIA 455

  • ANSI/TIA/EIA-607

  • ISO/IEC IS 11801

  • CELENEC EN 50173 

  • CELENEC EN 50174

  • TSB 67 Level III

  • IEC 793-1/2. 604

  • IEC 60603-7-7

In addition, we take into account the specificities and requirements of each customer to formulate the appropriate control methods and specifications.

 

3. Detailed Measurements in Certification Tests:

For copper and fiber optic networks, measurements are taken at all points of the cable installation, which include:

  • Physical continuity test of the network:
    Confirming that all connections are correct and uninterrupted.

  • Continuous loop resistance measurement:
    To identify possible faults or interruptions.

  • Electrical interference level check:
    Ensuring that there is no interference that will affect the transmission of the signal.

  • Cable length measurement:
    To ensure that the specifications for correct data transmission are met.

  • Cable impedance measurement:
    To ensure that specifications for proper data transmission are met.

  • Cable capacitance measurement:
    To detect any deviation from quality standards.

  • Cable capacitance level measurement:
    To detect any deviation from quality standards.

  • Signal loss level measurement:
    To detect any deviation from quality standards.

  • Interference level check:
    To assess clarity.

  • Signal to noise ratio measurement noise:
    To assess signal reliability.

 

Network Marking and Documentation

Accurate marking is a vital part of certification:

  • Unique marking:
    All network elements (patch panels, sockets, boundary strips) must be indelibly and clearly marked.

  • Consistency in marking:
    Patch panels and sockets must be fully synchronized, with the name and numbers corresponding to their location in the building (building, floor, room and socket number).

 

Service Provision Methods

The e-milles creations network certification service is offered in two ways:

  • One-time Installation:
    Creation and certification of the local network according to the initial requirements.

  • Maintenance Contract:
    Continuous monitoring and renewal of the certification to ensure maximum performance and the stability of the infrastructure over time.

 

With e-milles creations, you ensure that your network meets the highest quality requirements and complies with international standards, ensuring the optimal operation and reliability of your infrastructure. Contact us to discuss how we can strengthen your network through comprehensive audits and certifications that cover every aspect of the installation.